Wednesday, June 29, 2011

To make the printer is Durable


The printer is the print media, many types of printers are outstanding from a ribbon, toner cartridges up to, as a means of printing then the printer is very important. Often people get results is less good quality prints and the blame is not good quality ink, but not necessarily the quality of the ink is not good, probably because the printer is not good anymore.

There are a few tips for caring for the printer and the printer to go with good quality and more durable, among others:

* Use the printer regularly and periodically
The most frequent problems we hadapai is poor print quality, there is a transverse white lines, ink colors are missing or not come out at all.
With regular use of printers, then we still keep the ink flowing and wetting the surface of the nozzle. If we rarely use the printer, try at least once every one week we do a test print.

Thus, it can prevent the ink dry on the surface nozzle.if you do not do this, then the printer head more quickly you will dead end, and this applies to all brands of inkjet printers.

Tip: You can put a little note in front of your monitor to remind you to always do the printing on a regular basis every week, either to black or another color.
for example: do the printing web pages with rich tones or small-size photos in rich colors. This method is more efficient than you do a head cleaning on your printer.

Clear Cmos


As we know, CMOS is the memory where the data store hardware or computer components mounted in it, if the CMOS does not work with the normal operation of the computer will crash.

Things that make the CMOS does not work with normal antaralain caused:

    Possible CMOS Batre has been weak, so it can no longer mensupord power in CMOS when the computer dies.
    The habit of using equipment such as a USB Flash Drive, External Hard Drive directly in the pull without the Safely Remove Hardware, software installed and resulted in the CMOS data is stored and when the computer is turned on again Hardware CMOS data is not found.
    The possibility of an attack due to virus attack regystry windwos associated with CMOS so between CMOS and windows is not synkron.
    As a result of too frequent system failure without shutdown, resulting in the system does not save the CMOS settings, and are ready to save the CMOS settings for dimatiin sudden components.

If CMOS is disrupted computer usage is not stable, although all components of the computer is not damaged.

To overcome this you need to make improvements all the CMOS by removing the CMOS memory tersetting.

How:

1. Make sure your computer is not connected to the electricity grid.

2. Open CPU



Clr Cimos3. After the CPU cover in open view on your motherboard socket with writing CLR CMOS Jumper (As shown in the picture above, usually setting the jumper near the CMOS batry

how to use the laptop


Laptoop PCs are mobile computers, very practical to carry everywhere, but we also need to know how to use the correct order Lapptop laptop is more durable and its performance remains good.
There are a few suggestions for a laptop that you use can be durable and long lasting, among others:

1. Know Your Laptop Specifications
By knowing the specifications of your laptop, you can find out what the program can be installed into your laptop. Do not install a program that heavy and require working memory and processor power to be heavy, it will result in faster processor will increase the heat and the results can make processors becomes damaged.

2. The length of Laptop Use
Use the old laptop that will result in heat on your laptop components, which can cause damage to your computer components. Use the software to display the temperature of harddisks temperature, your Processor. the software will warn you when the temperature has passed the name Normal temperatures software PC Wizard 2008. If you get a warning temperature computer components you've gone through the normal limits save your work and turn off your laptop.

Friday, June 24, 2011

setting dhcp server mikrotik OS

if you don't know setting internet with mikrotik. the first you can visit http://step-technology.blogspot.com/2011/06/setting-internet-with-mikrotik-os.html

if you have known, you can follow the instruction this bellow for dhcp server mikrotik os:

1. we use winbox. select IP---> dhcp server


2. select DHCP setup and then on DHCP Server Interface select local

setting internet with mikrotik os

MikroTik RouterOS is the operating system and software that can be used to make computer manjadi reliable network routers, includes a variety of features designed for IP networks and wireless networks, suitable for use by ISPs and hotspot providers

The following steps so that we can use Mikrotik as a router for internet.

1. The first step we change the name of the ethernet to make it easier to do the configuration settings.


[admin@MikroTik] > interface set ether1 name=public
[admin@MikroTik] > interface set ether2 name=local


2. Setting ip for ethernet

Thursday, June 16, 2011

types of wheels

1. Wire Spoke whele: Rim is made from sheets of steel or aluminum alloy circular and the drum is attached rigidly by steel wires radius.

Wednesday, June 15, 2011

how to remove the battery properly

The battery disconnect very often we respond with ease, regardless of the things that can cause incidents such as fires or explosions if in doing so in an environment that is flammable. The following stages are very easy to avoid things that are not desired.
1. Do not disconnect the red / positive (+) first because it can cause the tool used to touch the valve negative (-)that is connected to the body on a machine . resulting in a brief relationship.


2. so the truth is the first disconnect the black / negative (-) after the cable was loose red / positive (-) so that short circuit can be avoided.

using properly for nuts and bolts

In removing or installing nuts or bolts we need to consider the steps correctly, if done incorrectly can cause damage.
1. Oblique bolt position, but still forced into using the wrench, it can cause the bolt locks into the center of the screw may damage the existing pattern.

wrong

2. Installation of mounting bolts starting with the goal to make sure your fingers under the bolts installed properly. at the time of starting to feel a little heavy, continue to use the right tools.

right

Monday, June 13, 2011

Blinking Led Lamp with sdcc program

The first we must install sdcc program, after that we can begin to make Blinking Led Lamp.

1. type programs in the following figures on the notepad program

2. Save the file with the extension c (*. c).