motorcycle is a means of transportation besides cars, trains, ships and airplanes. growth in the use of motor vehicles sepada very rapidly, as well as economical in fuel use also agile on the road is narrow. shortcomings on a motorbike is hot or rainy weather. but thus treating motor bike still has to be kept in good condition. there are a few tips that should be considered as follows:
- see the condition of oil
- see the condition of batteries: Do not let water pass Accu maximum and minimum limits that a result can accelerate damage to the battery cells. Add battery in the morning.
Do not let the battery or batteries that have started to weaken, immediately replace it, not a good thing if you're forcing to use it. If still forced both positive and negative poles will issue corrosion (white powder) that will spread to the main cables that connect the electrical current to the channel lights, dynamo, or other parts.
If indeed you have this motor, the electric current delivered is not perfect battery or batteries will cause damage to the components of the armature, contacts and a switch engine lights. One thing to note if the batteries are weak or can not afford the starter and distarter, do not force pushing the motorcycle to turn it on because it will only damage the transmission gear.
- Check the chain and Gir
Do not let the chain is too loose or too tight. Too loose can make the chain dislodged from girnya, while too fast could result in breaking the chain. Also check the condition of gear, if it is a sharp change soon, because otherwise the chain can suddenly drop out. Dangers, if again speeding suddenly break the chain.
- Check the coil and spark plug cables
Note the presence of the cable that connects the coil electric current to the spark plugs. Quickly replace the cables that seem old enough and a lot of visible cracks and hardening on the cable. Do not forget to note the presence of spark plugs because the plugs are very vital for the smooth running of a vehicle engine.
- Notice Gasoline Hose
Gasoline into the carburetor hose merupakanm also noteworthy components. Do not let the gas hose to harden or cracks occur, because the inside of the hose can be no inelastic and lead dust from dirt brought into the carburetor hose. In the end there will be stoppage of supply of gasoline from the tank to the carburetor so that disrupt the combustion system.
- Heat Engine at the latest 2 Minute
Heat the engine before the motor is run, no need to stay long enough for 1-2 minutes to the circulation of oil to lubricate all moving parts in the engine. Do not be too long because the heat will make the exhaust pipe yellowed otherwise you would not want to waste fuel.
- Check tire pressure
Do not be too hard and also not less because the motor can result in tire damage.
- Always Use Original Spare part
Better a little expensive, but satisfied and durable than the wear that is not original, but even cheaper but less durability.
No comments:
Post a Comment