In removing or installing nuts or bolts we need to consider the steps correctly, if done incorrectly can cause damage.
1. Oblique bolt position, but still forced into using the wrench, it can cause the bolt locks into the center of the screw may damage the existing pattern.
2. Installation of mounting bolts starting with the goal to make sure your fingers under the bolts installed properly. at the time of starting to feel a little heavy, continue to use the right tools.
3. Do not be too tight in tightening the bolt as it can change shape or broken.
4. Tighten all bolts according to torque and make sure all the components working smoothly.
5. Do not add to the long arm of tools because it can lead to a berlibihan pengencengan screw bolts and damaging.
6. Do not use improper size, because it can cause the bolt head will become round and hard to open. in this case try using a key ring or use the right key and appropriate for the head bolts.
1. Oblique bolt position, but still forced into using the wrench, it can cause the bolt locks into the center of the screw may damage the existing pattern.
 |
| wrong |
2. Installation of mounting bolts starting with the goal to make sure your fingers under the bolts installed properly. at the time of starting to feel a little heavy, continue to use the right tools.
 |
| right |
3. Do not be too tight in tightening the bolt as it can change shape or broken.
4. Tighten all bolts according to torque and make sure all the components working smoothly.
5. Do not add to the long arm of tools because it can lead to a berlibihan pengencengan screw bolts and damaging.
 |
| wrong |
No comments:
Post a Comment