Wednesday, June 29, 2011

To make the printer is Durable


The printer is the print media, many types of printers are outstanding from a ribbon, toner cartridges up to, as a means of printing then the printer is very important. Often people get results is less good quality prints and the blame is not good quality ink, but not necessarily the quality of the ink is not good, probably because the printer is not good anymore.

There are a few tips for caring for the printer and the printer to go with good quality and more durable, among others:

* Use the printer regularly and periodically
The most frequent problems we hadapai is poor print quality, there is a transverse white lines, ink colors are missing or not come out at all.
With regular use of printers, then we still keep the ink flowing and wetting the surface of the nozzle. If we rarely use the printer, try at least once every one week we do a test print.

Thus, it can prevent the ink dry on the surface nozzle.if you do not do this, then the printer head more quickly you will dead end, and this applies to all brands of inkjet printers.

Tip: You can put a little note in front of your monitor to remind you to always do the printing on a regular basis every week, either to black or another color.
for example: do the printing web pages with rich tones or small-size photos in rich colors. This method is more efficient than you do a head cleaning on your printer.


* Turn off the printer If Not Used
Do not forget to always turn the printer off when not in use. This will prevent the closing holes of the flow of ink in the printer head.

Important: turn off the printer with an on / off button on your printer, do not turn off by unplugging your printer. Because if you turn off the on / off button, will activate the mechanical capping that will help to prevent drying nozzle.

* Clean the Dirt in Printers
Clean the inside of the printer every one or two weeks, depending on how often and how much you use the printer. This will keep your printer in a printing capabilities. Do not forget to observe whether there are objects left in the printer such as paper clips and so on. Do not store the printer in a dusty or full of insects. If it is a dusty place, it's good printer with plastic wrap to protect it from dirt.

Important: Do not use the Vacuum Cleaner to clean the printer, can result in short / short circuit and fire on board in the printer.
Tip: If you live in dusty, wear a cover of the printer to your printer is more protected from dust, cover can be either plastic or cloth.

* Keep a Good When Replacing Cartridge Ink
Printer cartridges filled with delicate electronic interface. These objects may be damaged if treated carelessly. Could be the signal to the computer to be broken or poor prints. Therefore, treat the cartridge carefully.

Do not touch electrical parts of the cartridge, such as chips and head with your fingers, because the static electricity on the body sometimes can damage components, if forced to use cleaning the tissue paper with good quality, because the tissue paper with poor quality paper will actually leave the particles and potentially clog nozle head.

* If using refill ink refill make sure to use good quality, do not fill the cartridge is too full as it can cause leaks in cartrdige and can be spread on the motherboard of the printer.

* Use Diagnostic Tools
The whole printer has the software's help on how to care for or overcome the problem of the printer. Take time to learn. Maybe the information provided can help you overcome problems in your printer.

* Turn off the printer If Failed Printing
Failure to print or error message that sometimes appears, sometimes can be overcome by turning off the printer, then unplug the power cord for at least ten minutes. After that, insert the power cord at the plug, turn on the printer and try printing again. This way is often able to overcome the failure to print properly.

* How printing
When printing make sure the paper is not many times but still use paper that is fine, because if caught can damage the roller on the printer

* Choosing a Cartridge

Many manufacturers offer revile or ink cartridges, be careful you do not use ink or revile revile the ink cartridge is easy to freeze, because the ink will close the print head. Because not all types of printers that haed printnya in cartridges, like the Epson printer head on the engine printnya

* Others
Do not let your printer cartridge is empty without the long term, because it can cause the print head from drying out.

Note wastepad (waste ink) printer, replace wastepad or use the outside so that disposal would not be likely to smear the ink inside the printer.

Never open the printer Cassing, because the printer components can only be in service by people who really understand.

No comments:

Post a Comment